Braemar Single Phase Ducted Reverse Cycle Air Conditioner

Indoor Unit

• R32 refrigerant
  More environmentally friendly, R32 refrigerant global warming potential is 68% lower than R410A, with up to 30% reduction in charging quantity needed.
• Gold Fin
  Protective coating on the indoor heat exchanger coil for greater durability.
• ZERL
  Rated to the latest zoned energy rating label standard.
• Efficient and quiet
  Inverter technology, optional motion sensor and installer settings tailoring airflow, all ensuring maximum efficiency and the quietest operation.
• Low profile design
  Visually appealing, discreet and low profile unit to deliver conditioned air via ducting and suitable ceiling or wall grilles.
• Condensate pump as standard
  All single phase ducted inverters have the option of utilising the built in drain pump or the gravity drain. The condensate pump has a 1m lift, making it easier to get the condensate away from the indoor unit and to the nearest drain point. This provides flexible installation options.
• Home automation system adaptable
  Modbus compatibility allows operation with a wide range of home automation systems. Remote on/off control available for applications that require connection to a Building Management System (BMS), or require a room card.

Outdoor Unit

• Black Fin
  Advanced protective coating on the outdoor coil to reduce corrosion and protect from the harsh Australian elements.
• Flexible outdoor placement
  Long pipe runs of up to 75m allows flexibility in placing an outdoor unit.
• Slim design
  Allows more flexibility in placing an outdoor unit. Easily fits into tighter spaces.
• Quick and easy installation
  Single drain connection point allows for quick and easy installation.
• DRED as standard
  Demand response enabled device capability is standard

Zone Controller for Ducted Reverse Cycle Systems

Smart, sophisticated and incredibly intuitive, your Braemar Zone Control controller makes operating your Braemar ducted reverse cycle air conditioner so simple. The discreet and modern design will blend seamlessly into the décor of your home.

• Control 4 to 8¹ zones with individual temperature control.
• Set different temperatures for each zone.
• Ability to turn zones on and off, at the RF remote sensor, or, at the wired wall control.
• Each zone can be both temperature and time schedule controlled.
• Prevent excessive power bills by setting “SAVE” function. This function limits the upper and lower temperature settings.
• Optional additional subsidiary wired wall control can be purchased to allow two access points to your zone system.
• “X-Fan” function allows the indoor fan to continue after the system has been switched off in cooling mode, this helps dry the indoor heat exchanger
• Optional Wi-Fi control module

Disclaimer:
1. Zoning is an optional extra. Braemar zone control kit comes standard for a 4 zone system. For systems with more than 4 zones, additional optional extra RF remote sensors are required.