Breezair is the efficient, environmentally-friendly air cooling system with low water and energy consumption.
Designed for any industrial and commercial space, it’s the perfect healthy and efficient solution for cooling internal and external spaces. Compared to traditional air conditioning it is easier to install and maintain because it has no compressor.
Breezair is leading edge evaporative cooling technology, not to be confused with lower end products referred to as swamp coolers.
Why is it healthier than traditional A/C?
Using a natural process, it improves indoor air quality by supplying 100% fresh, cool outside air into the building. Whether you need warehouse air conditioning, air conditioning for manufacturing plants or factory air conditioning, Breezair is the cost-effective and energy efficient solution. Breezair is also perfect as bakery air conditioning or food industry cooling.
Based on the simple principles of evaporation, hot and dry outside air is pumped through water-soaked pads called Chillcel® pads. As the air blows through the Chillcel pads, the water is evaporated and the heat in the air is absorbed, which lowers the air temperature. A fan then pushes the cool air through the ducting system into the building.
Breezair cooling units can be used in fan only mode (no water) when the outside temperature is cool enough, to blow fresh air through the whole building.
It is important to remember that cooled air inside the building is not recirculated, so doors or windows must be left open for this air to escape, alternatively via extraction fans or roof ventilators, providing the whole building with a complete change in air at required intervals.
This is Breezair, the world leading evaporative air cooler for commercial use.
Yes. With no recirculated air (as from traditional refrigerated systems), evaporative cooling is the best solution for industrial plants, especially in production and packaging areas. Keeping doors or windows open (or using an exhaust fan), the fumes, germs, CO2 and odours are drawn outside while the cooler brings in 100% fresh air.
Yes. Outdoor areas have no walls to contain the cool air. These spaces would be impossible to cool using refrigerated air conditioning because this relies on recirculating and reusing air from a sealed area. Evaporative air conditioners (coolers) can easily supply a flow of fresh and cool air to open and semi open areas since the air is exhausted naturally.
Refrigerated air conditioners tend to drop in cooling performance as ambient temperatures rise, and eventually will end up failing altogether in extreme temperatures. Evaporative coolers will continue to operate reliably even under the most extreme external temperature conditions cooling performance improves as temperatures rise, together with cost saving capabilities.
Yes. With the MagIQtouch controller you can control up to 60 coolers and set up with a 7-day program: program mode divides each day into four different time periods. You decide how you want your system to work. With the MagIQcool controller, you can decide how long you want the evaporative cooler to delay power on and off.
• Evaporative air conditioners (coolers) are excellent for health
• They supply 100% fresh, filtered air into your building that is not recirculated, improving Indoor Air Quality (IAQ) of the space, supporting customer and staff well-being
• They remove unhealthy pollution from your indoor environment
• They provide basic moisture that the human body needs
• They remove static electricity; they can assist in reducing the effects of illnesses such as asthma.
BLUETREE PRINT COMPANY
Area: 100,000 square feet
Number of units installed: 8 Breezair TBS 580
Application: Spot cooling
Installer: Encon Air Systems Limited
“It was essential that the cooling system be up and running for the start of summer, in order to prevent system down time and back logs due to excessive temperatures on the shop floor. With the Breezair system, we can continue to meet tight turnarounds without being dogged by breakdowns.”
Jim Swain, Operations Director.
Area: 4,000 sqm
Number of units installed: 5 Breezair TBS 580
Temperature improvement: from 30°C to 20°C
Installer: Optimair Limited
“The product’s ability to reach the right level of relative humidity had other very significant impacts on operations: higher humidity in the air minimized electrostatic discharge during manufacture, which lessened component failure during assembly.”
Darren Dooley, Production Manager.
(Automotive Plastics Industry)
Location: Eaglescliffe, Stockton on Tees
Area: 10,000 sqm
Number of units installed: 28 Breezair TBSI units and 10 extraction fans
Installer: Ambient air Ambient Air Conditioning UK Ltd
“Stale warm air is now extracted and replaced with fresh air leading to a happier work force.” Ross Burke, MD Ambient air
Location: Waterford, Ireland
Number of units installed: 4 Breezair units
Temperature improvement: from 30°C to 23°C
Area cooled: Injection moulding workshop
“The level of complaints has been drastically reduced and the morale amongst the workforce is very much better”, says Norman Pearson. “I would recommend installing Breezair in any factory where high temperatures are causing a poor thermal environment”.
Norman Pearson, Plant Engineer.
The world’s coolest, quietest and most energy efficient evaporative air conditioning
Fill in your details or call us for a free survey
We’ll get back to you with all the information about the system and installation costs.
3. Receiving direct marketing content from us and our suppliers about our products and services via email.
You also confirm that you have read and accept our Terms and Conditions, and acknowledge that you are at least 16 years of age.
^ Seeley International’s calculation based on approximate running costs figures from publicly sourced data. Comparison with 2 star not zoned ducted refrigerative system in a large size (220m2) 2-star pre 2005 building in a Melbourne climate, cooling all day on the weekend and in the morning and evenings when internal temperatures are high.